|
Vertical Form
Fill Seal Equipment
Product
Videos
 Creative Automation produces a multi-lane draw bar machine used primarily in the food, cosmetic and pharmaceutical industries. Capable of packaging liquid or dry products, this machine design was chosen because of the superior sealing characteristic capabilities inherent in an intermittent motion film advance. Typical continuous motion vertical form fill and seal machines have only momentary contact for the vertical seal. Our design allows a sustained, adjustable sealing contact, resulting in superior seals and permitting the use of less expensive films.
Machine construction is robust to insure many years of trouble free service.
Specifications:
| Maximum web width: |
22 Inches (standard) |
| Maximum roll diameter |
20 inches (standard) |
| Maximum bag length: |
18 Inches (standard) |
| Maximum cycle rate (3"bag) |
70/min. (dependent upon product
handling characteristics) |
Larger sizes available as special order
Machine Construction:
Diagram
-
Carbon steel frame coated with a FDA approved white powder coat.
-
Anodized aluminum, Stainless steel and FDA powder coated steel construction.
-
Heater bars and jaws made from Hastelloy faced plated steel or hard anodized aluminum.
-
AC Vector duty drive motor.
-
All fasteners and hardware stainless steel.
-
PLC based controls.
-
Powered film unwinds.
-
Touch-screen operator interface.
-
Alarms for broken heater wires,
thermocouples and temperature deviation.
Options available:
-
Stainless steel frame and enclosures.
-
Wash-down machine.
-
Multi-lanes up to 12 up.
-
Positive Displacement pump.
-
Auger Filler
-
Custom designed feeders.
-
Static eliminators.
-
Photo-sensor film registration
-
Perforators.
-
Hole Punchers
-
Tear Notchers.
|
